Home>Resources>Company News3nh New Product Release KS268A Series Gloss Meter

3nh New Product Release KS268A Series Gloss Meter

For those working in appearance quality inspection for plastics, coatings, automotive interiors, home appliances and printing, you have probably encountered this confusing situation: two test samples show minimal color difference data and look quite similar in hue, yet a clear visual gap appears when placed side by side. Many people assume the color measurement is inaccurate, but the root cause often lies in another overlooked indicator — gloss.

Color defines what shade an object is, while gloss describes how light reflects off its surface. For products with strict appearance requirements, controlling only color difference without monitoring gloss is insufficient to evaluate overall surface consistency. In this article, we break down gloss measurement in detail and help you select among our three new gloss meter models.

1. Why Should Color and Gloss Be Controlled Together?

Take black plastic components as a typical example. Two batches may have nearly identical Lab colorimetric values, but differences in surface texture, spraying process, material formulation and molding conditions can result in one being high-gloss and the other matte. Once assembled into the same finished product, the visual inconsistency becomes obvious. Automotive interiors, home appliance housings, coatings, plastics and packaging materials are where such issues frequently occur. 

Therefore, quality control needs to check not only whether the color drifts, but also whether the surface gloss stays consistent. Only when color and gloss are integrated into one evaluation system can appearance control be complete.

2. Why 20°, 60° and 85° Angles for Gloss Testing?

Let’s start with the fundamental principle. Gloss, or the perception of shininess, originates from two ways light interacts with a material surface: smooth surfaces produce specular reflection with concentrated light for a bright, mirror-like look; matte or textured surfaces scatter light via diffuse reflection for a soft, low-shine finish. A gloss meter emits light at a fixed angle, captures the specular reflected light from the corresponding direction, and converts the signal into gloss values in GU (Gloss Units).

High-gloss, medium-gloss and matte surfaces reflect light with vastly different intensities, so a single angle cannot cover all sample types. The national standard GB/T 9754—2025 and international standard ISO 2813 specify three standard geometries: 20°, 60° and 85°, each for a distinct gloss range:

20°: The magnifier for high-gloss surfacesLight strikes nearly vertically, creating a tightly focused specular beam that is highly sensitive to minor gloss variations on high-gloss materials. If a 60° reading exceeds 70 GU, switch to the 20° angle. It is ideal for automotive clear coats, piano finishes, electroplated parts and mirror-effect plastics.

60°: Universal benchmark for most industriesThis balanced middle angle suits the medium-gloss range of 10–70 GU and covers over 80% of routine testing scenarios. It is the default choice when no test standard is specified. Common applications include wood coatings, home appliance casings, ceramic glazes, standard plastics, flooring panels and printed paper, widely used for incoming inspection and finished-product retention sampling.

85°: The magnifier for low-gloss matte surfacesThis grazing angle runs nearly parallel to the sample surface, amplifying weak reflected signals from low-gloss materials. It is designed for matte and textured substrates where the 60° reading is below 10 GU, such as matte plastics, suede-like leather, flat wall paints and coarse paperboards.

3nh_gloss_meter

Benefits of three-angle gloss meters

A single golden sample can deliver readings at 20°, 60° and 85° in one test, easily distinguishing high-gloss and matte performances.

Picking the wrong angle leads to unreliable results: testing high-gloss samples at 85° produces falsely low readings and may wrongly reject qualified bright coatings; testing matte samples at 20° captures little specular light, causing low and unstable readings. If all samples are measured only at 60°, the sensor can saturate on glossy surfaces while subtle differences on matte surfaces get masked.

Follow this practical workflow: start with 60° for a preliminary test. Retest at 20° if the result >70 GU, or at 85° if the result <10 GU. Always use the same measurement angle for batch comparison.

3. Three New 3nh Gloss Meters — Match Your Testing Needs

To meet the above three typical testing requirements, 3nh launches three cost-effective new gloss meters for affordable gloss control on production lines.

① KS60SA: Economy 60° single-angle gloss meterBuilt for daily on-site industrial QC with the universal 60° geometry. It features a 9×15 mm measuring spot, 0–220 GU range and measurement speed under 1 second. Its metrological performance complies with JJG 696 for working gloss meters. The device stores up to 10,000 records, weighs roughly 300 g, and runs more than 10,000 measurements on one AA battery.


Suitable for regular 60° gloss checks, fast on-site data acquisition for incoming material inspection, in-process sampling and finished goods release. Widely adopted for paints, inks, coatings, printed paper, plastic electronics, furniture, ceramics, electroplating, hardware and marble. It delivers stable, traceable readings and solves the pain points of inconsistent and incomparable gloss data.

gloss_measurement

KS60SA Highlights: Universal 60° angle, instant testing directly on production lines

② KS268A: Economy three-angle gloss meterAn all-in-one unit supporting 20°/60°/85°. It handles both high-gloss and matte samples with one instrument, finishing each angle measurement in just 0.5 seconds and meeting JJG 696. It eliminates the need to purchase, calibrate and maintain multiple single-angle meters to cut costs. It is widely used for routine gloss inspection of paints, inks, coatings, printed paper, plastic electronics, furniture, ceramics, electroplating, hardware and marble. Optional printer and Bluetooth 5.0 are available.

KS268A_gloss_meter

KS268A Highlights: Integrated 20°/60°/85°, Bluetooth 5.0, compatible with external printers

③ KS60MA: Entry-level 60° micro-spot gloss meterIt is engineered with a tiny measuring spot for small, narrow and irregular workpieces. The 2×4 mm spot reaches hard-to-test areas including small hardware edges, buttons and the perimeter of holes. It is a budget-friendly option for contract manufacturers and IQC inspectors who need to test miniature parts. It works for paints, inks, coatings, printed paper, plastic electronics, furniture, ceramics, electroplating and marble.

KS60MA_entry-level_60_micro_pore_gloss_meter

KS60MA Highlights: 2×4 mm micro spot, perfect for small parts, particles and areas around holes

4. Core Specifications Overview

KS60SA

Measurement angle: 60°; Spot size: 9×15 mm; Range: 0–220 GU, resolution 1 GU; Measurement time: <1 s; Complies with JJG 696; 10,000 data storage; USB for power supply only; For routine on-site sampling of flat surfaces.

KS268A

Measurement angle: 20°/60°/85°; Spot size: 20°:9×10 mm, 60°:9×15 mm, 85°:5×38 mm; Range: 0–220 GU (20°/60°), 0–160 GU (85°), resolution 1 GU; Measurement time: 0.5 s per angle; Complies with JJG 696; 10,000 data storage; USB connection, compatible with GQC6 software; Ideal for mixed high-gloss & matte product portfolios to avoid multiple instruments.

KS60MA

Measurement angle: 60°; Spot size: 2×4 mm micro spot; Range: 0–220 GU, resolution 1 GU; Measurement time: <1 s; Entry-level economical model; 10,000 data storage; USB connection, compatible with GQC6 software; Dedicated to small, narrow and profiled parts.

5. Quick Selection Guide

  • Mainly 60° routine gloss testing, limited budget, fast on-site readings → KS60SA

  • Wide product range covering both high-gloss and matte, avoid multiple devices → KS268A

  • Focus on small hardware, narrow edges, hole surroundings and irregular tiny samples → KS60MA

Closing Remarks

Appearance quality control is shifting from subjective visual judgement to objective data-driven management. Color tells us “what the color is”, while gloss defines “how the surface reflects light”. By controlling both indicators simultaneously, you can greatly reduce the awkward scenario where color difference data looks acceptable yet samples show obvious visual mismatch side by side.


Justin Lee

Senior Optical Engineer

15+ years in color measurement R&D, Holds 8 patents in spectrophotometry
This article is edited by Justin Lee, the website content writer of 3nh, who has 15 years working experience in the color management industry and often discusses with colleagues in R&D, marketing and production departments about the professional knowledge and application of color measurement devices, and has a deep understanding of the industry and products.
Please feel free to contact me to discuss more about your color measurement projects
service@3nh.com.

Justin Lee - Senior Optical Engineer

Featured Resources & Insights

Give us a call!

Discuss your project with one of our product specialists:

0086 755 26508999

Need pricing?

We respond to quote requests within 1 business day.

service@3nh.com

Already know what you need?

Submit a demo request for the product you're interested in.

Get a Demo
Leave Your Message
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy policy