Language
Chinese English español Italiano Giapponese coreano
Home>Main Instruments>Test Charts>Texture Test Charts

Color Spilled Coins (Dead Leaves) Test Chart

Color Spilled Coins (Dead Leaves) Test Chart Instructions Operating Manual Color Spilled Coins (Dead Leaves) Test Chart PDF
This Color Spilled Coins (Dead Leaves) Test Chart Instrument are Certified with
certify
1 Years Warranty (Additional support period of 3 years)

The Color  Spilled Coins chart (a variant of the Dead Leaves chart) for measuring texture sharpness has several advantages over older Dead Leaves charts. Key features:

  • The Scattered Coins pattern in the central region is almost perfectly scale-invariant (unlike conventional dead leaves charts), enhancing the accuracy and robustness of MTF measurements so they correlate well with other methods (such as the slanted-edge) for RAW images (which have no nonuniform or nonlinear processing).
  • Maximum contrast range is 3:1, as called for in the CPIQ Phase 3 draft Texture Blur Metric draft specification.
  • It is more uniform, i.e., is more shift-invariant than other Dead Leaves charts.
  • It contains slanted edges (2:1 and 4:1 contrast) for convenient comparisons with the dead leaves pattern.
  • The gray area to the left and right of the dead leaves pattern has the same mean density as the dead leaves pattern, allowing it to be used for effective noise PSD removal using the McElvain et. al. technique.
  • Registration marks and 16 grayscale patches are included. The linear levels used to create the grayscale patches are 0 through 255 in steps of 17 (same as the Siemens Star chart in the draft of the upcoming ISO 12233 standard).
Spilled Coins chart sizes Spilled Coins region Printed region Media size total
Large 12" × 12"
305 mm × 305 mm		 22.4" × 16.8"
569 mm × 426 mm		 24" × 18"
610 mm × 458 mm
Medium 8" × 8"
203 mm × 203 mm		 14.93" × 11.2"
379 mm × 284 mm		 16" × 12"
458 mm × 305 mm
Small 6" × 6"
152 mm × 152 mm		 11.2" × 8.4"
284 mm × 213 mm		 12" × 10"
305 mm × 254 mm
X-Small (High Precision Transmissive) 5.536" × 5.536"
141 mm × 141 mm		 9.25" × 7.75"
159 mm × 197 mm		 10" × 8"
254 mm × 203 mm

Our Valued Clients

  • our customer xiaomi
  • our customer Truly Opto Electronics
  • our customer Largan Precision
  • huawei
  • our customer q tech smart vision
  • our customer SEMCO
  • our customer sunny optical
  • our customer lenovo

FAQs About  Texture Test Charts

For pharmaceutical tablet color accuracy & compliance (USP/EP/ICH/FDA), these 3nh spectrophotometers deliver superior precision:

1. TS8560 Benchtop (Lab/R&D – Highest Precision)

  • d/8° integrating sphere, SCI/SCE dual mode

  • ΔE*ab ≤ 0.01 (repeatability), IIA ≤ 0.1

  • Small apertures (Φ3mm/Φ8mm) ideal for tablets

  • Auto positioning, temp/humidity compensation

  • 21 CFR Part 11 software for audit trails

  • Best for: R&D, formulation, strict QC, coated tablets3nh TS8560 

2. TS8503 Benchtop (Mid-High Accuracy)

  • d/8°, dual CMOS sensor

  • ΔE*ab ≤ 0.018, IIA ≤ 0.24

  • Multi-aperture, camera view locating

  • Stable for batch-to-batch tablet consistency

3. ST70 Portable (Production/Field)

  • d/8° (SCI/SCE), ΔE*ab ≤ 0.02

  • Handheld, fast, non-destructive

  • Best for: line checks, incoming materials, small labs

4. NS800 (Cost-Effective QC)

  • 45/0 geometry, ΔE*ab ≤ 0.04

  • Rugged, touchscreen, easy QC

  • Suitable for uniform, uncoated tablets

Short Recommendation

  • Top lab accuracy: TS8560

  • Best value benchtop: TS8503

  • Portable production: ST70

  • Economical QC: NS800

All meet pharmaceutical standards for tablet color uniformity, coating consistency, and stability testing.


The gloss scale is normally measured against the scale of 0 to 100 gloss units (GU). The scale is zero at matte and 100 at a mirror. Other very smooth surfaces can be over 100 GU at lower angles, such as 20°.


True color in chemistry is the color seen in a solution or compound in standardized conditions. It depends on electronic transitions in molecules, specifically absorption of a particular wavelength of light, and this depends on the structure of the compound.

Readings of gloss meters in gloss units (GU) are used to measure shine on the surface. Low GU (0-10) is matte, 10-70 semi-gloss or satin, and above 70 is glossy. Measurement angle is given to the readings: 60° is the normal, 20° is the high gloss, and 85° is the low gloss.


 A gloss test gauges the reflective quality of a surface by casting light at a fixed angle and measuring the amount reflected. It defines the level of shine or dullness of a surface, and it is very crucial in coatings, automotive, and product finishing


For premier glass quality grading (color, transmittance, haze, coating uniformity, architectural/auto/optical glass), the top 3nh & industry-leading instruments are:


1. 3nh YS6060 Benchtop (Best Lab Accuracy)

  • d/8° integrating sphere, 360–780nm, UV adjustable

  • Dual mode: reflectance + transmission

  • ΔE*ab ≤ 0.015, IIA ≤ 0.2, haze measurement

  • Multi-apertures (Φ4/8/15/25.4mm)

  • Ideal: colored glass, coated glass, optical glass, lab R&D


2. 3nh TS8560 Benchtop (Ultra-High Precision)

  • d/8° sphere, SCI/SCE, UV control

  • ΔE*ab ≤ 0.01 (repeatability)

  • Large transmission compartment

    Best for: high-end architectural glass, Low-E coated glass



3. 3nh ST70 Portable (Production/Field)

  • d/8° (SCI/SCE), ΔE*ab ≤ 0.02

  • Handheld, fast, non-destructive

    Best for: line checks, incoming glass, on-site grading



4. 3nh NS810 Portable (Cost-Effective)

  • 45/0 geometry, ΔE*ab ≤ 0.04

  • Touchscreen, rugged

  • Best for: solid-color glass, routine QC

Short Recommendation

  • Top lab: YS6060

  • Ultra-precision: TS8560

  • Portable production: ST70

  • Economical QC: NS810

All measure color consistency, transmittance, haze & coating uniformity for glass quality grading.


Related Texture Test Charts You May Also Like

Copyright ©1998 - 2026 Guangdong Threenh Technology Co.,Ltd. Privacy Policy

Give us a call!

Discuss your project with one of our product specialists:

0086 755 26508999

Need pricing?

We respond to quote requests within 1 business day.

service@3nh.com

Already know what you need?

Submit a demo request for the product you're interested in.

Get a Demo
Leave Your Message
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy policy